Trim can be made to your specifications. Call us for details.
| Item | Length | Girth | Gauge | Description | |
| Ridge Cap |
 |
10’ 0″ -21′ 0″ | 13 5/8″ | 29 26 |
Standard pitch is 3/12. Please specify pitches greater than 3/12 |
| Flat Ridge Cap |  |
10’ 0” – 21′ 0″ |
Variable | 29 26 |
(A) Specify pitch of roof (B) Specify Length of each leg |
|
Formed Ridge Cap
(For R-Panel Only) |
 |
36″ |
39″ (Coverage is 36″) | 26 |
Used to cap ridge for low pitch metal buildigs |
|
Small Corner
|
 |
10’ 0” – 21′ 0″ |
9 1/4″ | 29 26 |
Used at corner connections or on the rake of building |
|
Standard Rake/Corner
|
 |
10’ 0” – 21′ 0″ |
12 1/8″ | 29 26 |
Used at corner connections or on the rake of building |
|
Inside Corner
|
 |
10’ 0” – 21′ 0″ |
12 1/8″ | 29 26 |
Used to trim inside corner connection of building |
|
Rake/Corner (R-Panel)
|
 |
10’ 0” – 21′ 0″ |
14″ | 29 26 |
Used at corner connections or on the rake of building when using R-Panel |
|
3 x 3 Angle
|
 |
10’ 0” – 21′ 0″ |
7″ | 29 26 |
Used to trim corners or connections |
|
Gable Trim
|
 |
10’ 0” – 21′ 0″ |
10 1/4″ | 29 26 |
Used to trim gable ends and provides a drip edge away from the fascia |
|
Standard Eave
|
 |
10’ 0” – 21′ 0″ |
4 1/2″ | 29 26 |
Commonly known as drip edge. Can be used around the perimeter of the building |
|
J-Trim
|
 |
10’ 0” |
3 5/8″ | 29 26 |
Used to trim around openings such as windows and doors |
|
J-Trim (R-Panel)
|
 |
10’ 0” – 21′ 0″ |
4 1/2″ | 29 26 |
Used to trim around openings such as windows and doors when using R-Panel |
|
Base Angle
|
 |
10’ 0” – 21′ 0″ |
4 1/2″ | 29 26 |
Also known as rat guards. Used to keep rodents from entering the building from under wall panels |
|
Double Angle
|
 |
10’ 0” – 21′ 0″ |
4″ | 29 26 |
Also known as S trim. Used for veritical panel to panel connections |
|
Door Jamb
|
 |
10’ 0” – 21′ 0″ |
6 7/8″ | 29 26 |
Used to trim out door jambs |
|
End Wall
|
 |
10’ 0” – 21′ 0″ |
12″ | 29 26 |
Used to flash wall to roof connections. Please specify roof pitch |
|
Side Wall
|
 |
10’ 0” – 21′ 0″ |
12″ | 29 26 |
Used to flash wall to roof connections. Standard degree is 90. Please specify pitch if this varies |
|
Transition
|
 |
10’ 0” – 21′ 0″ |
12″ | 29 26 |
Used to flash transitions from roof to roof when pitch changes. Please specify both roof pitches |
|
“V” Valley
|
 |
10’ 0” – 21′ 0″ |
20″ | 29 26 |
Standard valley with wings for flashing valleys at roof connections |
|
“W” Valley
|
 |
10’ 0” – 21′ 0″ |
20″ | 29 26 |
Valley with center rib to slow velocity of water entering valley |
|
Track Cover
|
 |
10’ 0” – 21′ 0″ |
12″ | 29 26 |
Covers and flashes sliding doors and track |
|
Mansard Cap
|
 |
10’ 0” – 21′ 0″ |
Variable | 29 26 24 |
Caps over masard or parapet wall. (A) Specify length of each leg (B) Specify width of top |
|
Flat Flashing
|
 |
10’ 0” – 21′ 0″ |
Please Specify |
29 26 |
Available from 1” – 40 7/8” for 29 gauge Available from 1” – 41 9/16” for 26 gauge Avaliable from 1″ – 48″ for 24 gauge |
