Tools

We have many tools to help metal work easier. Of you are working with metal roofing, you need the right metal roofing tools. We only carry the most dependable metal tools a B&M. Whether its hauling, cutting, crimping or bending metal we have the tool to help you get the job done.

av7.jpg

Tool Description
Kevlar Gloves
For protection while handling metal materials.
Tie Downs (Set)

tools_tdownset

Four per set.
Tie Downs (Heavy Duty)

tools_tdownhd

One per set.

 

Bending Tool
S_HemmingTool_White.JPG
Used to put the hem on an edge detail for architectural panels (gables, eaves, and valley detail).
Drip Edge Folding Tool

c-deft.jpg

Used for quick bends in standing seam panel edges. Makes up to 1 1/2″ (38.1 mm)  deep bends along drip edge of roofing panel.
12″ Folding Tool

12-folding-tool.jpg

Folds edges of aluminum siding, Trim coil and lighter gauges of sheet metal up to 26 gauge.
1/4” Magnetic Socket
S_Bit_114.jpg
Used for woodgrip screws .
5/16” Magnetic Socket
S_Bit_114.jpg
Used for self-driller screws .
Metal Cutting Blades

As compared to using an abrasive wheel, you’ll obtain: 1) less noise 2) fewer blade changes 3) no burr on edges 4) drastically reduced sparking 5) less cost per cut 6) faster cutting 7) cool cutting. Available in 48 and 56 tooth models.
AV3 Snips
av3.jpg
Aviation style steel metal snips for straight cuts and slightly curved cuts in either direction. Straight, Left, and Right Cutting application with yellow handle.
AV6 Snips
av6-large.jpg
Aviation style steel metal snips for straight cuts and slightly curved cuts in either direction. Left Cutting application with yellow handle.
AV7 Snips
av7.jpg
Aviation style steel metal snips for straight cuts and slightly curved cuts in either direction. Right Cutting application with green handle.
M2003 Snips
m2003.jpg
Cuts Superior material flow and lower profile allows maximum maneuverability. Fast adjusting, long life pivot bolt and nylon locking nut with pressure washer holds desired adjustment even for repetitive use in heavy gauge metal. The ergonomic grip maximizes power stroke of hand while the classic grip has the fit and feel of tradition. Tips of jaws ground to point allows access in tight quarters. Straight, Left, and Right cutting application.
M2005 Snips
c-m2005.jpg
The Max 2000 Bulldog Aviation Snip designed for notching and trimming.
M2006 Snips
m2006.jpg
The serrated upper jaw of the Max2000 Offset Snip offers solid gripping power with less burr. Ground tips on jaws allow access in tight areas, so that Max Offsets can easily make nickel size blind hole cuts. A full 1-1/4″ cutting plane offset from handles makes trim cuts with the Max2000 Offset both accessible and efficient. Cuts sharp left angles.
M2007 Snips
m2007.jpg
The serrated upper jaw of the Max2000 Offset Snip offers solid gripping power with less burr. Ground tips on jaws allow access in tight areas, so that Max Offsets can easily make nickel size blind hole cuts. A full 1-1/4″ cutting plane offset from handles makes trim cuts with the Max2000 Offset both accessible and efficient. Cuts sharp right angles.
MC12A Snips
jjgjhkj.jpg
Sleek styling, easy blade replacement and larger handles make the Andy™ Snip more versatile. A sleek head design improves maneuverability. Ideal for making cuts in tight material, shapes such as J-Channel. A full 3″ (76.2 mm) cutting length makes straight shearing with the Malco Andy™ Snip fast and easy. Blade replacement is easily accomplished in the field.
MC12NG Snips
Sleek styling, easy blade replacement and larger handles make the Andy™ Snip more versatile. A sleek head design improves maneuverability. Ideal for making cuts in tight material, shapes such as J-Channel. A full 3″ (76.2 mm) cutting length makes straight shearing with the Malco Andy™ Snip fast and easy. Blade replacement is easily accomplished in the field.
 MV12
  Cut through heavy vinyl siding lockseams and more with ease! This unique Andy combination snip design features a knife-like cutting edge to produce a smooth slicing action for easy one-hand operation. The user simply grasps the snip with the red grip up for optimal blade alignment when making straight cuts or left or right circular cuts in a variety of non-ferrous materials including: layered components of heavy-grade vinyl siding and aluminum trim coil. Please note that the versatile Andy MV12 Snip is NOT FOR CUTTING STEEL.
2″ Hand Seamer
s2_large.jpg
Precise vee-notched depth graduations on jaws are in 1/4″ (6.4 mm) increments. Jaws are drop forged, high impact steel. Hardened steel handles resist abuse. Powerful compound leverage design. Tool also features rust resistant nickel plating. Non-slip vinyl grips with hand stops provide added comfort and control.
3″ Hand Seamer
s3_large.jpg
Precise vee-notched depth graduations on jaws are in 1/4″ (6.4 mm) increments. Jaws are drop forged, high impact steel. Hardened steel handles resist abuse. Powerful compound leverage design. Tool also features rust resistant nickel plating. Non-slip vinyl grips with hand stops provide added comfort and control.
6″ Hand Seamer
s6_large.jpg
Wide 6″ jaws produce uniform, accurate bends in sheet steel and non-ferrous metals with greater control and efficiency. Wider jaws also minimize buckling and bowing of metal. Fewer strokes are required to bend and straighten angles. Designed for all the metal trades, including HVACR installation, roofing and siding applications and commercial building and remodeling.
Straight Seamer & Tongs

thingsgroup.jpg

Precision ground jaws with beveled nose produces 135-degree bends. Ideal for precise metal fabricating including HVAC and Metalworking Specialist trade applications.
Straight Seamer & Tongs (Gripped Jaws) (SG10)

thingsgroup.jpg

Non-marring, vinyl-gripped jaws are ideal for bending and seaming painted metals including soffit and fascia and metal roofing.
Offset Seamer & Tongs (S11)

thingsgroup.jpg

Versatile, maneuverable offset design is ideal for overhead applications for HVAC and Metalworking Specialist trades. Precision ground jaws with beveled nose produces 135-degree bends.
Offset Seamer & Tongs (SG11) (Gripped Jaws)

thingsgroup.jpg

Non-marring, vinyl-gripped jaws in a versatile offset design are ideal for bending and seaming painted metals including overhead applications for Siding Applicators and Metal Roofing Specialists.
Metal Edge Roller

mrer_large.jpg

The Malco Edge Roller No. MRER makes clean precise bends along the edge of standing-seam metal roofing or metal building panels.
25′ Measuring Tape

t430m_t425m_t416m.jpg

Malco’s “MAGNETIC TIP” TAPE MEASURE is ideal for every ferrous metalworking project! Use it for HVAC ductwork installations, ceiling grid applications, metal stud framing and more. A powerful magnet and self-supporting 1” wide blade makes 1-person measurements and measuring elevations an easy task. The magnetic tip and big standout blade can even be used as a pick-up tool! A double riveted tip connection, abrasion-resistant, nylon coated blade and rubber-clad housing and blade stop assure lasting performance.
30′ Measuring Tape

t430m_t425m_t416m.jpg

Malco’s “MAGNETIC TIP” TAPE MEASURE is ideal for every ferrous metalworking project! Use it for HVAC ductwork installations, ceiling grid applications, metal stud framing and more. A powerful magnet and self-supporting 1” wide blade makes 1-person measurements and measuring elevations an easy task. The magnetic tip and big standout blade can even be used as a pick-up tool! A double riveted tip connection, abrasion-resistant, nylon coated blade and rubber-clad housing and blade stop assure lasting performance.
Turbo Shear

ts1.jpg

The TURBOSHEAR Model No. TS1 inserts directly into the chuck of a standard 1200 rpm A/C or cordless drill.Cuts straight and to the left and is capable of navigating tight curved patterns and squares in heavy 20-gauge (1.02 mm) galvanized steel. Blind cuts require only a 1/2”(12.7 mm) starting hole. Cutting applications include both ferrous and non-ferrous sheet metals, metal roofing/building panels, vinyl, steel mesh, ductwork, even the thick metal of furnace jackets, equipment enclosures or automotive body panels. An offset design keeps both hands away from work surface. Long-wearing hardened jaws are also replaceable.

 

Turbo Shear Heavy Duty
tshd_large.jpg
The TurboShear HD cuts straight and to the left and makes fast cuts in material thickness up to 18-gauge galvanized steel. Cutting applications include both ferrous and non-ferrous sheet metals, metal roofing/building panels, vinyl, steel mesh, and ductwork.
Hand Riveter
c-cr18.jpg
Four rivet nosepieces: 3/32”, 1/8”, 5/32”, and 3/16″ store in handle. Suited for riveting applications in gutter and downspouts. Not for use with 5/32″ or 3/16″ steel rivets (steel rivets larger than 3.2 mm). Spring return handles and comfortable contour grip make operation fast and easy.
Crimper (3 blade)
sc3_large.jpg
Ideal for crimping heavy 24 to 22 gauge (0.71 to 0.86 mm) galvanized sheet steel. Nickel plating and vinyl grips.
N2 Notcher
n2_large.jpg
The N2 Notcher punches a big 1 inch (25.4 mm) deep “V” notch in common 24 to 30 (0.71-0.41 mm) gauge galvanized sheet metal quickly and easily.
 SRT2
  SideSwiper model SRT2 combines the comfort and added leverage of an easy-to-grasp straight handle with the smooth unlocking motion of a burr free hook. The blade of the SRT2 is angled from the bottom plane of the handle and allows the user to keep the wrist straight while keeping knuckles well above the work. Blade surface finishing and plating assures that the sharply angled hook will not cut into the vinyl material or produce shavings.
 TNP2S
 Heavy Duty Trim Nail Punches Drive trim nails into soffit, fascia and other finishing trim without denting or marring material. All-steel nose and aluminum tail piece directs weight of this punch to the working end when grasping or starting a nail. Accommodates up to 1-1/4″ (31.2 mm) standard trim nails. Nose fits into 1/2″ (12.7 mm) J channel.
Shingle Remover
sb48_large.jpg
Shingle removal is a beast of a job but now, finally, there’s a tool that’s up to the task. THE BEAST Shingle Remover from Malco makes a tough job bearable. THE BEAST cleanly lifts off heavy loads of shingles and pulls nails in one motion. All long handled BEASTS feature replaceable 10 gauge (3.40 mm) tempered steel blades with variable length teeth. A comfortable D-grip is also standard.
Shingle Remover (Adjustable Head)
sb48a_large.jpg
Shingle removal is a beast of a job but now, finally, there’s a tool that’s up to the task. THE BEAST Shingle Remover from Malco makes a tough job bearable. THE BEAST cleanly lifts off heavy loads of shingles and pulls nails in one motion. This model comes with an adjustable head for handling any roof pitch. All long handled BEASTS feature replaceable 10 gauge (3.40 mm) tempered steel blades with variable length teeth. A comfortable D-grip is also standard.
Safety glasses
Protective eyewear, recommended when working with metal materials.

 

Caulk Gun
Small and lightweight caulking gun.