| Item | Description | |
| Model 650 Rollup door |  |
The Janus ratchet tensioning device, supplied as standard equipment on our door, offers a simpler method of tensioning while more accurately fine tuning all the springs on the door at the same time. There is no extra hardware required. Eight different positions on the tension wheel allow one to perfectly balance the door every time. There are no pins required to hold the tension on the spring… you simply just click it. |
| Model 1000 Rollup door | |
|
| Model 1950 Rollup door | |
|
| Model 2000 Rollup door | |
|
| Model 2500 Rollup door | |
|
| Model 3000 Rollup door | |
|
| Model 3100 Rollup door | |
|
| Glideral Tube Motor |  |
|
| Pantheon Motor |  |
Used as a drive for the rollup door to move it up or down |
| Jackshaft Motor |  |
The Pantheon electric door operator from Janus International is a unique new technology designed to make installation as easy as 1-2-3. The Janus Pantheon Operator is a stronger and easier to install DC motor operator for today’s door industry, featuring a simple floor level manual release system, soft start and soft stop operation. Pantheon operators use low voltage DC motors, which are more quiet and efficient than standard AC motors. If needed the door can be operated with minimal effort with an 18:1 chain reduction hoist. |
| Remote |  |
Weather-proof single or 3-button wireless control stations are available. In addition, a choice of either a 5 or 250-code wireless keypad is available |
| Chain Hoist Kit |  |
A reduced drive chain hoist allows for smoother operation on doors over 10’0” wide or 10’0” tall. |
| Mounting Plates |  |
Mounting Brackets are engineered and designed with deep embossing for strength, and are independently tested to withstand more than 2,700 pounds per pair. The installation-friendly mounting brackets feature safe rounded edges and slots that allow for easy vertical adjustments as well as various installation preferences. |
| Mini Latch |  |
Used to lock the Roll Up door from the inside or outside of your structure. A pad lock can be used in conjunction with the mini latch for added security. |
| Step Plate |  |
Used to close door completely using ones foot |
| Cast Axel Support Bracket |  |
The cast axle support bracket is used on doors that incorporate a chain hoist. In addition to holding the axle, it also bolts to the chain hoist box and the door mounting bracket. |
| Stamped Axel Support |  |
The stamped axle support is used on doors that are not incorporating a chain hoist and is used to hold the axle in place. |
| Tensioner Assembly |  |
(Models 650 and 1000 only) The Janus ratchet tensioning device, supplied as standard equipment on our door, offers a simpler method of tensioning while more accurately fine tuning all the springs on the door at the same time. There is no extra hardware required. Eight different positions on the tension wheel allow one to perfectly balance the door every time. There are no pins required to hold the tension on the spring… you simply just click. (All other Models) A cam-action spring tension holding device allows quick, easy and equal adjustment of the tension on all springs simultaneously from one end of the door. The cam tensioner bites into the axle helping to eliminate the unwanted spinning of the axle during the initial spring loading oradjustment process. |
| Vision Panel |  |
Can be installed into door to be used as a viewing window |
| Top Draft Stop |  |
Attached to the top of door to reduce draft |
| Side Draft Stop |  |
Used on the sides of door to reduce draft |
| Bulb Astragal |  |
Attached to the bottom of door to reduce draft |
