R Panel Trim

R Panel Trim can be made to your specifications. Call us for details.

Item Length Girth Gauge Description
Ridge Cap
Ridge Cap
10-21″ 13 5/8″ 29
26
Used to cap the intersections of a roof at the peak. Can be used for gable or hip roofs.
flat ridge
Flat Ridge
10′-21″ 7″ 29
26
Used to cap the intersections of a roof at the peak. Can be used for gable or hip roofs. This ridge is easier to manipulate when two roof lines intersect.
Standard Eave
Standard Eave
10′-21″ 4 1/2″ 26 Also known as drip edge. Can be installed at the gable or eave to protect the wood beneath the metal.
J trim
J trim
10′ 3 1/2″ 29
26
Used to trim around doors , Windows , or other openings when the edge of the metal needs to be concealed.
Jamb Trim
Jamb Trim
10′-21″ 12 1/2″ 29
26
Similar to the J Trim but contains an open hem to conceal the panel edge.
Standard Eave
Standard Eave
10′-21″ 4 1/2″ 26 Also known as drip edge. Can be installed at the gable or eave to protect the wood beneath the metal.
V Valley
V Valley
10′-21″ 20″ 29
26
Used to flash valley connection. The valley lip helps to divert water if it reaches the top of the valley.
W Valley
W Valley
10′-21″ 20″ 29
26
Used to flash valley connections. The center rib helps slow the velocity of water entering the valley.
Track Cover
Track Cover
10′-21″ 12″ 29
26
Used to flash and conceal sliding door track over the door opening.
Mansard Cap
Mansard Cap
10′-21″ Variable 29
26
Used to cap mansards and parapets. (A) specify length of each leg. (B) specify width of cap needed.
Angle Trim
Angle Trim
10′-21″ 12″ 29
26
Used to trim corners or connections.
W Valley With Wings
W Valley With Wings
10’21” 18″ 29
26
Gives maximum protection in a valley of a roof. The center ridge slows down the velocity of the water while the upper wing keeps water from getting past the top of the valley.
End Wall
End Wall
10′-21″ 12″ 29
26
Flashes the area between the wall and the panel where the panel runs perpendicular to the wall. Please specify pitch.
Side Wall
Side Wall
10′-21″ 12″ 26
26
Flashes the area between the wall and the panel where the panel horizontal to the wall.
Transition
Transition
10′-21″ 12″ 29
26
Used where two roofs meet to flash the changes in pitch such as a where a porch connects to a main roof.
Standard Rake/Corner
Standard Rake/Corner
10′-21″ 12 1/2″ 29
26
Used to cap the corner at the wall of a small structure.