Accessories

Accessory Size Description
Inside Closure S_Inside_Closure.jpg

Length 3′ Carton Size 100

 Fits Tuff-Rib® profile
Used under Tuff-Rib® panels at the eaves
Outside Closure S_Outside_Closure.jpg Length
3’
Carton Size 
100		 Fits Tuff-Rib® profile
Used on top of the Tuff-Rib® panels (Under the ridge cap, end wall, and transitions)
Vented Outside Closure  

Length 3′ Carton Size 100

  Installed at the ridge and allows air flow while creating a barrier against rain, insects, and debris.

 
Inside Closure (R-Panel) S_Inside_Closure_R.jpg Length
3’
Carton size 
100		 Used under R-Panels at the eaves
Outside Closure (R-Panel) S_Outside_Closure_R.jpg Length
3’
Carton Size
100		 Used on top of the R-Panel (Under the ridge cap, end wall, and transitions)
Colored Sealent S_Solar_Seal_900_SH.jpg Tube Size 11 Oz
Carton Size 
12

Formulated for long term performance on vinyl, cedar, architectural metals, brick, masonry, cured concrete, stucco, termination bars, flashing, and kynar coatings

 Specifications.
Skylight (Tuff-Rib) S_Skylight_Clear_Tuffrib.jpg Length
12’		 20 times stronger than 4 oz fiberglass
Warranted against hail damage
9” on center panel
38” wide 36” coverage
Specify white or clear

Specifications / Warranty
Skylight (R-Panel) S_Skylight_R_Panel.jpg Length
12’

20 times stronger than 4 oz fiberglass
Warranted against hail damage
12” on center panel
39” wide 36” coverage
Specify white or clear

Specifications / Warranty
Cupola 24”, 36”, 48” p_accessories_cupola Width
24”
36”
48”		 Please specify roof color, side wall color, flashing color, and pitch of roof
Weathervanes         Horse.jpg Height
29”
40”

Ask salesperson for available styles

Standard Styles

Special Styles
Sealer Tape   S_Sealer_Tape.jpg Length
45’
Width
3/8” or 1″		 Used for sealing between panel seams and for sealing around flashing
Touch-Up Paint           S_Touch_Up_Paint.jpg 2 oz Bottle Comes with applicator brush
Spray Paint            S_Spray_Paint.jpg 8 oz Can For use on vent pipes only
Not for use as touch up paint on metal panels or flashing
Double Sided tape S_Double_Sided_Tape.jpg 2 7/8″ x 150′ For use under insulation
Uni-vent uni_vent_roll_4c.jpg

Length

50′
20′

 Vents ridge cap and seals against water
Snowguards   3″ x 4″

Used to protect against snow slides on the roof.

Instructions

Specifications
Backer rod Specify Length Can be applied to the back of standing seam panels to help prevent oil canning.
Expanding foam Length 20′ Contains an adhesive backing and expands to seal gaps between flashing and panels.
Uniseal   1″ and 1 1/2″ Length 20′ Seals the gap between trim and panels for hips, transitions, wall flashings, etc
Door knob       Standard door knob.
Door Lever  

 

 Heavy duty lever style lock.